JVC UX-J99DVD - Manual (Page 51)

48
English
To record a single track during play or pause
While playing back or pausing a track you
want to record, press MD REC.
The playback of the track is stopped, and the same track starts
playing from the beginning again. This time, the MD recorder starts
recording the track. The REC (MD recording) indicator flashes on
the display.
• After the track is recorded, both the disc player and the MD
recorder stop automatically.
“WRITING” flashes on the display.
• When recording a chapter on DVD VIDEO
The playback of the chapter does not start playing from the beginning
again. The recording starts from the point when you press MD REC.
• When you press MD REC while pausing a track
Recording starts from that point.
• To record from the desired track
Select the track before playback, then press MD REC.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the recording
indications, the current track numbers of both the disc
and the MD, and the clock indication appear in sequence
on the display.
* If the loaded MD does not contain any group or more than 99 groups,
“G – –” will appear on the display.
C D
x 1
REC 1 2 3 4 5
MD
GROUP
LP 2
C D
x 1
REC 1 2 3 4 5
MD
GROUP
LP 2
C D
x 1
REC 1 2 3 4 5
MD
GROUP
LP 2
C D
x 1
REC 1 2 3 4 5
MD
GROUP
LP 2
Elapsed playing time
Remaining recording time
Current MD track number Current group number*
Recording Other Sources onto an MD
1
Prepare the source to record from.
To record from FM/AM broadcasts:
(1) Press FM/AM/AUX (or FM/AM on the unit) to select
either “FM” or “AM.”
(2) Tune in to a preset station you want (see page 14).
To record from a tape:
(1) Insert a cassette into the cassette loading slot.
• If the current playing source is not “TAPE,” press
TAPE 2 3, then 7 before going to the next step.
(2) Press REV.MODE to select Reverse Mode
(see page 43).
To record from external equipment:
Press FM/AM/AUX (or AUX on the unit) to select
“AUX” or “AUX-DIGITAL” and prepare the
external equipment to play.
• Adjust the audio input level if necessary (see page 44).
• For operation of the external equipment, see the manuals
supplied with it.
2
Insert a recordable MD into the MD loading slot.
• Set the MD recording length mode, “LP:”-prefix addition
mode, and group recording mode (see “Setting MD Recording
Modes” on page 46).
(On the remote control) (On the unit)
(On the remote control) (On the unit)
AUX
FM/AM
AUX
FM/AM
(On the remote control) (On the unit)
EN45-53_UX-J99DVD[UB]5.p65 03.12.12, 11:04 PM 48