JVC UX-J99DVD - Manual (Page 68)

65
English
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING” also
flashes while editing you have made is being recorded
on the MD.
To divide the joined tracks, see the DIVIDE function on page 64.
• If “CANNOT JOIN” appears in step 5
You cannot join the following tracks.
– Tracks recorded with different recording length modes (SP, LP2, LP4).
(See page 46.)
– Digital-recording tracks and analog-recording tracks.
– Tracks recorded using monaural long recording method (not possible on
this unit) and stereo-recording tracks.
• When the track belongs to a group
If the preceding track of two tracks you want to join belongs to a group,
the newly joined track will belong to that group. On the other hand, if the
preceding track does not belong to any group, the newly joined track will
not belong to any group even if the succeeding track belongs to a group.
Joining Two Tracks—JOIN
This function allows you to join two adjacent tracks into one track.
When the tracks have their own titles, the title of the preceding track
is reassigned to the newly joined track.
Once two tracks are joined, the other tracks and/or the groups are
renumbered.
• To stop any time during the editing process below before step
6 ,
press TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE EDIT repeatedly until
“JOIN ?” appears on the display.
• If the loaded MD has no track, “JOIN ?” will not appear.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one track, you cannot go to the
following steps.
4
Press UP ¢ or DOWN 4 to
select the two adjacent tracks you
want to join.
• You can also select the tracks using the number buttons. In this
case, the selected track starts playing repeatedly.
Ex.: When tracks 2 and 3 are selected.
Editing an MD
(Continued)
EN63-70_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 65