JVC UX-J99DVD - Manual (Page 64)

61
English
Ungrouping Tracks—UNGROUP
This function allows you to dissolve a group.
You cannot erase the tracks using this function.
Once tracks are ungrouped, the other groups are renumbered.
• To stop any time during the editing process below before step
6 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “UNGROUP ?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the following
steps.
• During playback:
The group number of the currently playing track will appear.
If the track does not belong to any group, the group number
will be indicated as “– –.”
4
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to select the
group you want to dissolve.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press ENTER.
The REC (MD recording) indicator flashes on the
display. Then “WRITING” also flashes while editing
you have made is being recorded on the MD.
Dissolving All Groups—UNGR ALL
This function allows you to dissolve all the groups.
You cannot erase the tracks using this function.
• To stop any time during the editing process below before step
4 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “UNGR. ALL ?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• To cancel the setting, press CANCEL.
4
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING” also
flashes while editing you have made is being recorded
on the MD.
Ex.: When group 3 is selected.
Editing an MD
(Continued)
EN54-62_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 61