JVC UX-J99DVD - Manual (Page 24)

21
English
4
For DVD VIDEO/AUDIO and MP3 disc:
(1) Press the number buttons
to select a title (for DVD
VIDEO) or a group (for
DVD AUDIO and MP3)
from the selected disc in
step 3.
• After entering a title or group number, track/chapter
number area will flash.
• For how to use the number buttons, see “To go to a
particular title, group, chapter or track directly using the
number buttons” on page 19.
(2) Repeat step (1) to select a chapter (for DVD
VIDEO) or track (for DVD AUDIO and
MP3).
For SVCD, VCD, or CD:
Press the number buttons to
select a track from the selected
disc in step 3.
• When you program a track from an
SVCD, VCD, or CD which is not
currently selected, you can skip the
group/title number by pressing
ENTER.
• For how to use the number buttons, see “To go to a particular
title, group, chapter or track directly using the number
buttons” on page 19.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 3 .
• To program tracks from a different disc, repeat steps 3 and 4 .
6
Press DVD
3.
The tracks are played in the order you have programed.
Program Play ends when all the programmed tracks are played
once (when Repeat Play is not activated).
To stop playing, press 7.
Playback stops, but Program Play is still activated.
• To exit from Program Play, see “To exit from Program Play” on
the next page.
To go to the next step, press ¢.
When the PRGM indicator lights in the display
You cannot change the disc tray currently selected.
Programing the Track Playing Order
—Program Play
You can arrange the order in which the chapters or tracks play
before you start playing. You can program up to 99 steps.
• Program Play may not be able to use with JPEG discs and some
DVDs.
• To use Repeat Play (see page 23) with Program Play, press
REPEAT after starting Program Play.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 3 again.
1
Load discs into the 5-DVD changer.
• If the current playing source is not “DISC,” press DVD 3 (or
#¥8 DVD on the unit), then 7 before going to the next step.
On the remote control ONLY:
2
Press PLAY/FM MODE repeatedly
until “PROGRAM” appears on the
display.
The PRGM indicator also lights up on the display.
• Each time you press the button, the play mode changes as
follows:
If a program has been stored in memory, the program is called
up.
3
Press the number buttons to
select a disc tray.
PRGM (program) indicator
PRGM
1 2 3 4 5
Disc tray number
Track/Chapter
number Group/Title
number
Program step number
PRGM
1 2 3 4 5
Playing Back Discs on the 5-DVD Changer
(Continued)
PROGRAM
(Program Play)
RANDOM
(Random Play)
OFF
(Continuous Play)
EN15-23_UX-J99DVD[UB]5.p65 03.12.12, 11:02 PM 21