JVC UX-J99DVD - Manual (Page 59)

56
English
In the following examples of group editing, the process is explained
from the very first—that is, inserting a disc. You can also edit an
MD during playback (in Normal Play).
Forming a Group—FORM GR
This function allows you to form a group from a series of tracks
which do not belong to the other groups. You can form a group from
a single track.
Once a new group is formed, the other groups are renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during the editing process below before step
8 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “FORM GR ?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• During playback:
The currently playing track number starts flashing.
4
Press UP
¢ or DOWN 4 to
select the first track of a new
group.
• You can also select the track using the number buttons. In this
case, the selected track starts playback repeatedly.
5
Press SET.
• If the track selected as the first track belongs to
another group, “GROUP TRACK” appears on the
display.
Select another track again (repeat step
4 ).
• If you want to form a group from the selected track only, go to
step 7 .
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press UP ¢ or DOWN 4 to
select the last track of the new
group.
• You can also select the track using the number buttons. In this
case, the selected track starts playback repeatedly.
7
Press SET.
• If the last selected track belongs to another group, “GROUP
TRACK” appears on the display.
Select another track again (repeat step
6 ).
• To cancel the setting, press CANCEL, then repeat from step 4 .
8
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING”
flashes while editing you have made is being recorded
on the MD.
To dissolve the group, see the UNGROUP function on page 61.
When “CANNOT FORM!” appears on the display in
step
7
You are trying to form a new group which includes another group between
the first and the last track. In this case, dissolve the previous group and form
a new one again.
Ex.: When track 3 is selected.
Ex.: When track 5 is selected.
EN54-62_UX-J99DVD[UB]5.p65 03.12.12, 11:05 PM 56