JVC UX-J99DVD - Manual (Page 40)

37
English
Playing Back an MD
To stop during play, press 7.
To remove the disc, press 0 (MD eject) on the unit.
• Pressing 0 (MD eject) button also turns on the unit if the MD is unlocked.
• If the MD has a disc/performer name or track has a title
The title will be shown at the lower part of the display for a while. (If a
title is long and cannot be shown at a time, the unit scrolls the title to show
the entire title.)
• About recording length mode
MDs are played back in the same recording length mode as they were
recorded. When an MD starts playing, the recording length mode of the
currently playing track appears on the display.
SP:
Indicates the tracks recorded in standard stereo recording mode on
this unit or those recorded on an MD recorder incompatible with
MDLP (see below).
LP 2: Indicates the tracks recorded in 2 times long-hour stereo recording
mode.
LP 4: Indicates the tracks recorded in 4 times long-hour stereo recording
mode.
For more details, see page 46.
MDLP features a new sound compression method (ATRAC3, see page
87) and enables a 2 times (or 4 times) long-hour stereo recording and
playing function.
The MDLP logo is marked on the MD recorders and players compatible
with MDLP. It is also marked on MDs pre-recorded in ATRAC3
(excluding recordable MDs).
Basic MD Operations
While playing an MD, you can do the following operations.
To pause playback
Press MD .
The elapsed playing time starts flashing on the display.
To resume playback, press MD again.
To locate a particular point in a track during play
On the remote control ONLY:
Press and hold ¡ or 1.
• ¡: Fast-forwards the track.
• 1: Fast-reverses the track.
Playing Back the Entire MD
—Normal Play
1
Insert an MD into the MD loading slot.
The MD is pulled in automatically.
• If the current playing source is not “MD,” press MD
, then
7 before going to the next step.
CAUTION:
During Power Save (see page 10), do not insert an
MD. Before inserting an MD, cancel Power Save or turn
on the unit first.
• The following indications appear when the current source is “MD”:
* When the loaded MD has no group, the total group number will be
indicated by “– –.”
• To make or edit groups, see pages 54 to 62.
** Disc title appears/scrolls before the total playing time if the loaded
MD has a title.
2
Press MD .
MD playback starts from the first track.
The recording length mode (SP/LP2/LP4) appears on the display.
• Track title appears/scrolls before the recording length mode if
the track has a title.
MD playback stops automatically after playing all the tracks on
the MD.
Insert an MD in
the same way as
indicated on the
MD.
MD loading slot
MD indicator
Total track number Total group number*
Total playing time**
MD
MD
(On the remote control) (On the unit)
MD
0
‹
/
8
(On the remote control) (On the unit)
MD
0
‹
/
8
EN37-42_UX-J99DVD[UB]5.p65 03.12.12, 11:04 PM 37