JVC UX-J99DVD - Manual (Page 61)

58
English
Dividing a Group—DIVIDE GR
This function allows you to divide one group into two separate
groups.
You cannot divide the group containing only a single track.
When the original group has a title, two separate groups are
reassigned the same title as the original group.
Once a new group is divided, the other groups are renumbered.
• To stop any time during the editing process below before step
7 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “DIVIDE GR?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the following
steps.
• During playback:
The current playing track number and its group number will
appear. If the track does not belong to any group, the group
number will be indicated as “– –.”
4
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to select the
group you want to divide.
5
Press UP
¢ or DOWN 4 to
select the track as the dividing
point.
The track selected in this step will be the first track in the
divided group.
• You can also select the track using the number buttons. In this
case, the selected track starts playback repeatedly.
• You cannot select the first track in a group or an ungrouped
track as a dividing point.
6
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
7
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING”
flashes while editing you have made is being recorded
on the MD.
To join the divided groups, see the JOIN GR function on page 59.
The first track of the selected group
Ex.: When group 2 is selected.
Ex.: When track 18 is selected.
EN54-62_UX-J99DVD[UB]5.p65 03.12.12, 11:05 PM 58