JVC UX-J99DVD - Manual (Page 49)

46
English
Stereo Long-Hour Recording (MDLP)
This unit allows for 2 times or 4 times long-hour recording
without losing stereo sound.
With this feature, songs (tracks) can be recorded on a single MD
using different recording length modes—SP: Standard Play, LP2:
2 Times Long Play, LP4: 4 Times Long Play.
SP:
Signifies standard-hour stereo recording. The amount of
time usable for recording is the same as shown on the
package of the MD.
LP2: Signifies 2 times long-hour stereo recording. The amount
of time usable for recording is twice as long as shown on
the package of the MD.
LP4: Signifies 4 times long-hour stereo recording. The amount
of time usable for recording is 4 times as long as shown
on the package of the MD.
To check the remaining recording time
Press DISP/CHARA repeatedly while recording until “REC
REMAIN” and the remaining time based on the current recording
mode appear on the display.
Precautions for performing long-hour stereo recording
After having made long-hour stereo recordings on this unit, pay
attention to the following:
• Songs (tracks) recorded in 2 times or 4 times long-hour
recording mode can only be played back on the equipment
provided with MDLP, compatible with a long-hour stereo
recording function; otherwise, “LP:” is displayed before a title
and playback proceeds without sounds.
• When editing songs (tracks) on an MD, you cannot join (JOIN)
songs (tracks) recorded in different recording length modes
(SP/LP2/LP4).
More about MDLP
• You cannot make a long-hour monaural recording using this unit.
• Sound quality will decrease as the recording length mode changes to
LP2 (little) and LP4 (much). To obtain the best sound quality, it is
recommended to use the SP mode when recording.
Setting MD Recording Modes
Before recording on MDs, set the recording length mode
(SP/LP2/LP4), “LP:”-prefix addition mode, and the group recording
mode.
To set the recording length mode
On the remote control ONLY:
The recording length mode can be set and stored for each source.
(1) Select the source (FM, AM, CD, TAPE, AUX or AUX-
DIGITAL) to record.
(2) Press REC TIME.
• Each time you press the button, the recording
length mode changes as follows:
SP Records using standard-hour stereo recording.
The SP indicator lights up on the display.
LP2 Records using 2 times long-hour stereo recording.
The LP2 indicator lights up on the display.
LP4 Records using 4 times long-hour stereo recording.
The LP4 indicator lights up on the display.
To set “LP:”-prefix addition mode
You can select whether or not to add “LP:” to the beginning of the
title for the tracks recorded using the stereo long-hour recording
mode (LP2 or LP4).
On the remote control ONLY:
Press LP:.
• Each time you press these buttons, the “LP:”-prefix
addition mode alternates between on and off.
(LP:) ON Adds “LP:” to the beginning of the track title. The
total number of characters you can enter for an MD is
reduced (for details, see pages 68).
(LP:) OFF Does not add “LP:” to the beginning of the track title.
To set group recording mode
You can form a new group (up to 99 groups) easily while recording
using group recording mode.
On the remote control ONLY:
Press GROUP REC ON/OFF.
• Each time you press the button, group recording
mode turns on and off.
MD GROUP ON All the tracks recorded at a time will form a
new group. The GROUP indicator lights up
on the display.
MD GROUP OFF Cancels group recording function. The
GROUP indicator goes off from the display.
SP LP2 LP4
(LP:) ON (LP:) OFF
MD GROUP ON MD GROUP OFF
EN45-53_UX-J99DVD[UB]5.p65 03.12.12, 11:04 PM 46