JVC UX-J99DVD - Manual (Page 71)

68
English
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Enter the unit into the title entry mode.
For the disc and track title:
Press TITLE EDIT.
• During stop mode:
Disc title entry screen appears on the display.
• During play mode:
Track title entry screen appears on the display.
For the group title:
Press GROUP TITLE EDIT.
Group title entry screen appears on the display.
• If the loaded MD has no group, you cannot go to the following
steps.
3
For the disc and track title:
Press UP
¢ or DOWN 4 to
change the title entry mode.
• Each time you press the button, the title entry mode changes as
follows:
For the group title:
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to change the
group entry mode.
• Each time you press the button, the title entry mode changes as
follows:
4
Press SET to enter the unit into the
selected title entry mode.
Assigning Titles to an MD
You can assign a name to each MD, to each group and to each track
using alphabetic characters (uppercase and lowercase), symbols and
numerals. Once a title is assigned, it is displayed for your
confirmation.
• You cannot edit titles composed of more than 61 characters.
To make the editing possible, slide to close the erasure
prevention tab on the cartridge side surface. (See page 45 for
details.)
About the number of characters entered for an MD
The total number of characters that you can enter for an MD is 1792. The
maximum number that you can enter for a disc/track title is 61.
(However, the actual number you can enter may be slightly less than the
maximum numbers due to the MD limitations—see page 88.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4, see page 46)
method is used for recording, the maximum number you can enter for a
track title is automatically reduced since “LP:” and a space are
automatically added to the beginning of the track title. Consequently
this reduces the total number of characters you can enter for an MD.
Ex.: You can enter up to 10 characters for each track if an MD is
composed of 120 tracks recorded using the stereo long-hour
recording method.
In the following example, the process is explained from the very
first—that is, inserting a disc. If you have already started recording
or playing, start from step
2 .
• You can edit titles during playback (in Normal Play).
• To exit from the title entry screen any time during the process,
press TITLE EDIT or GROUP TITLE EDIT repeatedly.
During Program Play or Random Play
You can edit the MD as long as the playback is stopped except during
Program/Random Play.
Ex.: When the disc has no title.
Character entry position
Character set
DISC TITLE? 1 TITLE?
3 TITLE? 2 TITLE?
GR 1 TITLE? GR 2 TITLE?
GR 3 TITLE?
EN63-70_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 68