JVC UX-J99DVD - Manual (Page 62)

59
English
Joining Two Groups—JOIN GR
This function allows you to join two adjacent groups into a single
group.
When the groups have their own titles, the title of the preceding
group is reassigned to the newly joined group.
Once two groups are joined, the other groups are renumbered.
• To stop any time during the editing process below before step
6 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until “JOIN GR ?” appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one or no group, you cannot go to
the following steps.
• During playback:
The group number of the currently playing track will appear
on the right. If the track does not belong to any group, the
group number will be indicated as “– –.”
4
Press GROUP/TITLE >>I or
GROUP/TITLE I<< to select the two
adjacent groups you want to join.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING”
flashes while editing you have made is being recorded
on the MD.
To divide the group, see the DIVIDE GR function on page 58.
When “CANNOT JOIN” appears on the display in
step
5
You are trying to join two groups which are separated by another track(s) in-
between. In this case, you need to move either of the groups (see page 60) or
the track(s) (see page 66).
Ex.: When groups 7 and 8 are selected.
Editing an MD
(Continued)
EN54-62_UX-J99DVD[UB]5.p65 03.12.12, 11:05 PM 59