Icom IC-7000 - Manual (Page 80)

71
4
RECEIVE AND TRANSMIT
qSelect the TV mode.
• Push and hold [AF(
SET
)] for 1 sec.
wPush [AF(
SET
)] momentarily to turn the blue-back-
ground display ON.
eRotate [M-ch] (inner) control to select the desired
TV channel.
• [ Y(
BAND )]/[ Z(
BAND )] keys also select the TV channel.
rPush [F-2 ADJ] to enter the channel frequency set
mode.
• The selected channel frequency appears and [RX] in-
dicator blinks.
• Push [TS] to toggle the tuning step from 1 kHz and 250
kHz.
• Push [ Z(
MENU / GRP
)] to exit the channel frequency set
mode.
tRotate [DIAL] to adjust the channel frequency.
• “Push [SET]” blinks.
• Push
[ Z(
MENU / GRP
)] to cancel the setting.
yPush [F-3 SET] to set the channel frequency.
• Push [F-4 DEF] for 1 sec. to return to the default fre-
quency.
u Push [ Z(
MENU / GRP
)] to exit the channel frequency
set mode .
• The channel frequency disappears and [RX] indicator
stops blinking.
iRepeat steps e to u to set the another channels,
if desired.
o
Push [AF(
SET
)] momentarily to turn the blue-back-
ground display OFF.
Push
Rotate
ADJ
Push
SET
[ Y]
[ Z]
[DIAL]
[AF] [TS] [RX] indicator
[MENU/GRP] [F-4] [F-2]
[M-ch]
[F-3]
DChannel frequency adjustment