Icom IC-7000 - Manual (Page 114)

105
8
MEMORY OPERATION
qSelect the menu M - 2.
wPush [F-4 V/M] to select memory mode.
ePush [F-1] (MEM, LST) twice to enter the memory
channel list.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
tRotate [M-ch] (inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• [ Y]/[Z] on the microphone also changes the channels.
yTo exit the memory channel list, push
[ Z(
MENU / GRP
)] twice.
Push
Push
Rotate
MEM
LST
[MENU/GRP] [F-1]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
■Memory channel list
D Selecting a memory channel using the memory channel list
The memory channel list simultaneously shows 7
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel list.
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M - 1 , M - 2 or M - 3
Either
Y or Z
Either
Y or Z