Icom IC-7000 - Manual (Page 56)

47
4
RECEIVE AND TRANSMIT
DEditing a keyer memory
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW se-
quences for often-used CW sentences, contest num-
ber, etc. Total capacity of the memory keyer is 55
characters per memory channel.
• Pre-programmed contents
• Programming contents
qPush [MODE] to select CW mode.
wSelect S-1.
ePush [F-2 KEY] then [Z(
MENU / GRP
)] to select the
keyer root menu.
• If the keyer root menu appears, skip pushing
[ Z(
MENU / GRP
)]. The keyer starting menu can be
changed in the miscellaneous (others) set mode.
rPush [F-2 EDT] to enter the keyer edit menu.
tPush [F-1 M1] — [F-4 M4] to select the desired
keyer memory channel.
yPush [Y(
MENU / GRP
)] several times to select the de-
sired character group ( [ABC], [123] or [etc]).
• Selectable characters (with [DIAL]);
NOTE:
“
^ ” is used to transmit a following word with no
space such as
AR
. Put “ ^ ” before a text string
such as ^AR, and the CW prosign “ ” is sent
with no space.
“ ✱ ” is used to insert the CW contest number.
The contest number automatically increments
by 1. This function is only available for one
memory keyer channel at a time. Memory
keyer channel M2 uses “
✱ ” by default.
uSelect the desired character by rotating [DIAL] or
by pushing the band key (HM-151) for the incre-
menting trigger memory number input.
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• “ ✱” is for contact numbers and can be input for the
count up trigger channel (“ ” appears).
iRepeat steps y and u until the desired contents
are input.
oPush [Z(
MENU / GRP
)] to return to memory channel
selection mode, then select the next memory chan-
nel and repeat steps
y and i for character input,
if desired.
!0Push [Z(
MENU / GRP
)] twice to exit the keyer edit
mode.
AR
Key selection
ABC
Editable characters
A to Z (capital leters)
123 0 to 9 (numbers)
etc / ? ^ . , @ ✽
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S - 1.
CH Contents
CQ TEST CQ TEST DE ICOM ICOM TEST
UR 5NN ✽ BK
CFM TU
M1
M2
M3
QRZ? M4
Memory channel select
Selected
character
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]