Icom IC-7000 - Manual (Page 70)

61
4
RECEIVE AND TRANSMIT
By monitoring a signal that is being transmitted on a
repeater input frequency, you can determine the tone
frequency necessary to access a repeater.
q
During tone squelch, DTCS squelch or repeater
operation (“
, ” “ ” or “ ” is dis-
played), select M - 3.
wPush [F-3 TON] for 1 sec. to enter the FM tone set
mode.
ePush [F-2 SCN] to toggle the tone scan operation
ON and OFF.
• When a matched tone or code is detected, tone scan
automatically stops, the matched tone or code is dis-
played and the tone or code setting is automatically ad-
justed accordingly.
rPush [Z(
MENU / GRP
)] to exit the FM tone set mode.
[MENU/GRP] [F-2] [F-3]
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M - 3.
DTone scan operation
During tone squelch operation. During DTCS squelch operation. During repeater operation.