Icom IC-7000 - Manual (Page 36)

■Selecting VFO/memory mode
27
3
BASIC OPERATION
qSelect M - 1.
wPush [F-2 A/B] to toggle VFO A or VFO B.
[MENU/GRP] [F-2]
Either “ ” or “ ” appears.
DSelecting VFO A/VFO B
qSelect M - 1.
wPush [F-2 A/B] for 1 sec. to set the undisplayed
VFO frequency and mode to those of the displayed
VFO.
• Three beeps sound when the VFO equalization is com-
pleted.
CONVENIENT
Use two VFOs as a quick memory
When you find a new station, but you wish to continue
searching, the Two VFO system can be used for quick
memory storage.
qPush [F-2 A/B] for 1 sec. to store the displayed fre-
quency into the undisplayed VFO.
wContinue searching for stations.
ePush [F-2 A/B] to retrieve the stored frequency.
rTo continue searching for a station, push [F-2 A/B]
again.
Push
then push
again.
for 1 sec.,
DVFO equalization
■VFO operation
qSelect M - 2.
wPush [F-4 V/M] to toggle VFO and memory
modes.
“VFO” indicator
Memory channel
indicator
[MENU/GRP] [F-4]
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M - 1 , M - 2 or M - 3
Either
Y or Z
Either
Y or Z