Icom IC-7000 - Manual (Page 77)

68
4
RECEIVE AND TRANSMIT
4
DProgramming a DTMF code
qPush [MODE] to select FM mode.
wSelect S-1.
ePush [F-2 DTM] then [Z(
MENU / GRP
)] to select the
DTMF root menu.
• If the DTMF root menu appears, skip pushing
[ Z(
MENU / GRP
)]. The DTMF starting menu can be
changed in the miscellaneous (others) set mode. (see
p.136)
rPush [F-2 EDT] to enter the DTMF edit menu.
tPush [F-1 D1] — [F-4 D4] to select the desired
DTMF memory channel.
ySelect the desired code by rotating [DIAL].
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected code.
uRepeat steps t and y until the desired contents
are input.
iPush [Z(
MENU / GRP
)] to return to memory channel
selection mode, then select the next memory chan-
nel and repeat steps
t and u for code input, if de-
sired.
oPush [Z(
MENU / GRP
)] twice to exit the keyer edit
mode.
DTMF memory channel select
Selected
code
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4] [DIAL]
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S - 1.
The rate at which DTMF memories send individual
DTMF characters can be set to accommodate oper-
ating needs.
qSelect the DTMF root menu as described above.
wPush [F-4 SET] to enter
the DTMF set mode.
eRotate [DIAL] to set the desired DTMF speed.
• Four rates are available: “100 ms” is the fastest; “500
ms” is slowest.
• Push [F-4 DEF] for 1 sec. to select the default rate.
rPush [Z(
MENU / GRP
)] twice to exit the DTMF set
mode and return to the normal FM mode display.
DDTMF speed