Icom IC-7000 - Manual (Page 73)

64
4
RECEIVE AND TRANSMIT
4
Some repeaters require subaudible tones to be ac-
cessed. Subaudible tones are superimposed over
your normal signal and must be set in advance. The
transceiver has 50 tones from 67.0 Hz to 254.1 Hz.
Each memory channel can store a different subaudi-
ble tone frequency.
qSelect M - 3.
wPush [F-3 TON] once or twice to turn the tone en-
coder ON.
• “TONE” appears.
ePush [F-3 TON] for 1 sec. to enter the FM tone set
mode.
• The selected tone frequency appears.
• Other tone function can be set by pushing [F-1 TON].
rRotate [DIAL] to set the desired subaudible tone
frequency.
• See table at right for available tone frequencies.
tPush [Z(
MENU / GRP
)] to exit the FM tone set mode.
Store repeater tone frequencies and ON/OFF settings
in memory channels for easy recall.
The transceiver’s
repeater tone frequency is set to 88.5 Hz by default.
This can be changed if desired.
• Available tone squelch frequencies
(Unit: Hz)
[DIAL] [MENU/GRP] [F-3] [F-1]
CONVENIENT
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M - 3.
DRepeater tone frequency
67.0
69.3
71.9
74.4
77.0
79.7
82.5 0 85.4
0 88.5
0 91.5
0 94.8
0 97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2 165.5
167.9
171.3
173.8
177.3
179.9
183.5 186.2
189.9
192.8
196.6
199.5
203.5
206.5 210.7
218.1
225.7
229.1
233.6
241.8
250.3 254.1