Icom IC-7000 - Manual (Page 116)

107
8
MEMORY OPERATION
D Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 9 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + –
✱ / . , : ; = < > ( ) [ ] { } | _
_
@)
and spaces can be used.
• Editing (programming) memory names
qSelect the menu M - 2.
wPush [F-4 V/M] to select memory mode.
ePush [F-1] (MEM, LST) twice to enter the memory
channel list.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
tRotate [M-ch] (inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• [ Y]/[Z] on the microphone also changes the channels.
yPush [F-2 NAM] to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
uPush [Y(
MENU / GRP
)] several times to select the de-
sired character group.
• [ABC], [abc], [123] or [etc] indicates the capital letters,
small letters, numerals or symbols, respectively
iInput the desired character by rotating [DIAL].
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• Pushing the HM-151’s keypad, [0]–[9], can also enter
numerals.
oPush [Z(
MENU / GRP
)] to input and set the name.
• The cursor disappears.
!0Repeat steps t to o to program another memory
channel’s name, if desired.
!1Push [Z(
MENU / GRP
)] twice to exit the memory
channel list.
Push
Rotate
NAM
Push
Ç
Selected character
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[DIAL] [MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M - 1 , M - 2 or M - 3
Either
Y or Z
Either
Y or Z