Icom IC-7000 - Manual (Page 109)

100
7
VOICE RECORDER FUNCTIONS
7
q
Select S - 1.
wPush [F-1 VO] to
call up the voice recorder menu.
• If the receive voice memory channels screen appears,
push [ Z(
MENU / GRP
)] then push [F-2 TX] to select the
transmit voice memory channel.
• If the voice root menu appears, push [F-2 TX] to select
the transmit voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
ePush [F-1 T1] — [F-4 T4] to transmit the con-
tents.
• “T1”– “T4” are highlighted while transmitting.
rPush the selected memory channel key, [F-1 T1]
— [F-4 T4], again to stop, if desired.
tPush [Z(
MENU / GRP
)] twice to exit the voice mem-
ory screen.
For your information
When an external keypad is connected to the pin 3
and pin 7 of the
[MIC] connecter, the recorded
message, T1–T4, can be transmitted without open-
ing the voice recorder set screen.
See page 137 for details.
[MENU/GRP] [F-2] [F-3] [F-4]
[F-1]
■ Sending a recorded message
q Call up the voice memory recording mode as de-
scribed in steps
q to w as above.
wPush [Y(
MENU / GRP
)] to select the voice memory
transmit level set mode.
ePush the desired memory channel key, [F-1 T1]–
[F-3 T3], momentarily to transmit the contents.
rRotate [DIAL] to adjust the transmit voice level.
• Push [F-4 DEF] to select the default condition.
tPush [Z(
MENU / GRP
)] to return to the voice recorder
screen.
DTransmit level setting