Icom IC-7000 - Manual (Page 118)

109
8
MEMORY OPERATION
■Frequency transferring
This is useful for transferring programmed contents to
VFO.
qSelect the menu M - 2.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M - 2.
wPush [F-4 V/M] momentarily to select the VFO
mode.
ePush [F-1 MEM] to display the memory channel
contents.
• Memory channel contents appear above the multi-func-
tion key indicator.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
tSelect a memory channel with [M-ch].
• “ ” appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
yPush [F-4 V/M] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear in
the display.
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency
Contents of memory 16
Push for
1 sec.
V/M
: 21.320 MHz/USB (VFO)
: 14.020 MHz/CW
[MENU/GRP] [F-1]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
DTransferring in VFO mode
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M - 1 , M - 2 or M - 3
Either
Y or Z
Either
Y or Z