Icom IC-7000 - Manual (Page 102)

93
6
FUNCTIONS FOR TRANSMIT
DQuick split setting
qEnter the miscellaneous (others) set mode as
above.
wPush [F-1 ≤] o r [F-2 ≥] to select “Quick
SPLIT,” then rotate [DIAL] to select the desired
setting.
• Push [F-4 DEF] for 1 sec. to return to default setting.
ePush [Z(
MENU / GRP
)] twice to return the normal op-
erating mode.
D Split offset frequency setting
By setting an often-used split frequency offset in ad-
vance, you can operate the quick split function to se-
lect split operation at the push of one key.
q
Push [AF(
SET
)] m omentarily to enter the set mode
menu.
wPush [F-4 OTH] to enter the miscellaneous (oth-
ers) set mode.
ePush [F-1 ≤] or [F-2 ≥] to select “SPLIT Off-
set.”
rRotate [DIAL] to set the desired split offset.
• The split offset can be selected from –9.999 MHz to
+9.999 MHz.
• Push [F-4 DEF] for 1 sec. to return to default value.
tPush [Z(
MENU / GRP
)] twice to return the normal op-
erating mode.
[DIAL] [MENU/GRP]
[AF]
[F-1] [F-2] [F-4]