Icom IC-7000 - Manual (Page 60)

■Operating RTTY (FSK)
When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.
q Push [ Y(
BAND
)]/[ Z(
BAND
)] to select the desired
band or push a band key on the HM-151 .
w P ush [MODE] momentarily to select RTTY mode.
• After RTTY mode is selected, push [MODE] for 1 sec.
to toggle between RTTY and RTTY-R modes.
eDisplay the RTTY decoder screen.
• Push [F-2 DEC] to display the Baudot decoder screen.
rRotate [DIAL] to simultaneously tune a desired sig-
nal.
• Use [F-2 1/4] in the M-3 display when critical setting
is required.
• S-meter indicates received signal strength when signal
is received.
• If the received signal cannot be demodulated, try se-
lecting RTTY-R mode (or RTTY mode).
tTransmit a SEND signal from your TNC.
• [TX] indicator lights red.
• The Po meter indicates transmitted RTTY signal
strength.
yOperate the connected PC or TNC (TU) to trans-
mit RTTY (FSK) signals.
“RTTY” or “RTTY-R” appears
[ Y]
[ Z]
[DIAL]
[MODE] [AF] [TX] indicator
[MENU/GRP] [F-2] • Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S - 1.
51
4
RECEIVE AND TRANSMIT