Icom IC-7000 - Manual (Page 14)

5
1
PANEL DESCRIPTION
■Multi-function keys
DMenu M-1 functions
SPLIT OPERATION
➥Push momentarily to toggle the split func-
tion ON and O FF. (p. 91)
• “ ” and transmit frequency appear when
the split function is ON.
➥Push and hold for 1 sec. to turn the quick
split functio n ON. (p. 92)
• The offset frequency must be pro grammed in
advance using the miscellaneous (others) set
mo
de. (p. 131)
• The offset frequency is shifted from the dis-
played frequency.
• The quick split function can be turned OFF in
the miscellaneous (others) s et mode. (p. 131)
VFO A/B SELECTION
➥Push momentarily to exchange the trans-
mit VFO and receive VFO contents . (p.
27)
➥Push momentarily to toggle the
transmis-
sion VFO and reception VFO during split
operati
on. (p. 91)
➥Push momentarily to toggle the transmit
and receive frequencies (and modes) of
memory channels when the split function
is turned ON.
➥Push and hold for 1 sec. to equalize the
frequency and operating mode of the two
VFO’s.
• The lower indicated frequency and operating
mode are equalized to the upper (indicated)
VFO frequency and operating mode.
FILTER SELECTI ON (p. 77)
➥Push momentarily
to select one of three
IF filter settings.
➥Push and hold for 1 sec. to enter the filter
set mode.
TRANSMIT FREQUENCY CHE CK (pgs. 65, 91)
Monitors the transmit frequency when
pushed and held.
• While pushing this key, the transmit fre-
quency can be changed with [DIAL].
DMenu M-2 functions
MEMORY MENU (p. 105)
Push momentarily to indicate the memory
frequency and modes.
• Memory list indication is available.
MEMORY WRITE (pgs. 103, 104)
Push and hold for 1 sec. to store the se-
lected readout frequency and operating
mode into the displayed memory channel.
MEMORY C LEAR (p. 108)
Push and hold for 1 sec. to clear the se-
lected memory channel contents.
• “ ” appears.
VFO/MEMORY SELECTION
➥Push momentarily to toggle VFO and
memory mo des. (pgs. 27, 102)
➥Push and hold for 1 sec. to transfer the
selected memory channel to the currently
displayed VFO. (p. 109)
DMenu M-3 functions
DURING SSB OPERATION:
DURING CW OPERATION:
DURING RTTY OPERATION:
DURING AM OPERATION:
F-1 F-2 F-3 F-4
VOX AGC
F-1 F-2 F-3 F-4
1/4 AGC
F-1 F-2 F-3 F-4
1/4 BRK AGC
F-1 F-2 F-3 F-4
TBW VOX COM AGC
F-4
V/M
F-3
MCL
F-2
MW
F-1
MEM
F-1 F-2 F-3 F-4
MW MEM V/M MCL
F-4
XFC
F-3
FIL
F-2
A/B
F-1
SPL
SPL A/B FIL XFC
F-1 F-2 F-3 F-4