Icom IC-7000 - Manual (Page 58)

49
4
RECEIVE AND TRANSMIT
This set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
etc.
• Setting the electronic keyer
qSelect CW mode with [MODE].
wSelect S-1.
ePush [F-2 KEY] then [Z(
MENU / GRP
)] to select the
keyer root menu.
rPush [F-4 SET] to enter the keyer set menu.
tPush [F-1 ≤] or [F-2 ≥] to select the desired set
item.
• Push [F-4 DEF] for 1 sec. to select the default condi-
tion or value.
yPush [Z(
MENU / GRP
)] twice to exit the keyer set
menu and return to normal CW mode indication.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S - 1.
[MODE]
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
DKeyer set mode
1 Keyer Repeat Time
When sending CW using the repeat timer, this item
sets the time between transmission. • 1 to 60 sec. in 1 sec. steps can be selected.
• Push
[F-4 DEF] for 1 sec. to select a default setting.
(default: 2 sec.)
2 Dot/Dash Ratio
This item sets the dot/dash ratio. • 1 : 1 : 2.8 to 1 : 1 : 4.5 can be set.
• Check the ratio with side tone in CW mode.
• Push
[F-4 DEF] for 1 sec. to select a default ratio of
1 : 1 : 3.0.
Keying weight example: Morse code “K”
DASH Weight setting:
1:1:3 (default)
Weight setting:
Adjusted
DASH
DOT (Fixed*)
Adjustable range SPACE (Fixed*)
*SPACE and DOT length can be adjusted with
“Key Speed” only in the quick set mode.