Icom IC-7000 - Manual (Page 105)

96
7
VOICE RECORDER FUNCTIONS
7
To record the receiving signal contents immediately,
one-touch voice recording is available.
qPush and hold [ANF/• REC] for 1 sec. while re-
ceiving a signal to start recording.
• “ ” blinks.
• Records audio into the new track.
wPush and hold [ANF/• REC] for 1 sec. again to
stop recording.
• Recording is automatically terminated after 120 sec. or
when a total of the recorded time becomes 1500 sec.
[ANF/ •REC]
Blinks
qSelect S - 1.
wPush [F-1 VO] to
call up the voice recorder menu.
• If the transmit voice memory channels (T1–T4) screen
appears, push [ Z(
MENU / GRP
)] then push [F-1 RX] to
select the receive voice memory channel.
• If the voice root menu appears, push [F-1 RX] to select
the receive voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
ePush [F-1 ≤] or [F-2 ≥] to select the desired
recorded contents, then push [F-3 PLY] to play-
back.
• “ ” appears.
r Push [F-3 PLY] again to stop playback, if desired.
• Playback is terminated automatically when all of the
recorded contents in the channel are played.
t Push [Z(
MENU / GRP
)] twice to exit the voice recoder
mode.
[MENU/GRP] [F-2] [F-3] [F-1]
■ Playing the recorded contents
D One-touch voice recording