Integra DTR-8.4 - Manual (Page 66)

66
Advanced Operation —Continued
Recording Separate AV Sources
You can record audio and video from separate sources,
allowing you to dub audio onto your video recordings. In
the following example, audio from the CD player con-
nected to the CD IN input, and video from the camcorder
connected to the VIDEO 5 INPUT VIDEO input are
recorded to the VCR connected to the VIDEO 1 OUT
output.
Note:
• For advanced audio dubbing, if you assign the VIDEO
5 INPUT VIDEO input to an additional input source,
say, the TAPE IN input, you can dub audio from two
sources and use the [CD] and [Tape] input selector
buttons to switch between them during recording.
1 Press the [Input] button, and then
roll the scroll wheel to select the
CD input source.
2 Press the scroll wheel, and then
press the [Setup] button.
The main menu appears onscreen.
3 Use the Up/Down [ ]/[ ] but-
tons to select “2. Input Setup,”
and then press the [Enter] but-
ton.
The Input Setup menu appears.
Display Audio Selector
Direct/ Pure Audio
Master Volume Standby/On
Video 1 Video 3 Tape Tuner Phono Net Audio CD DVD Video 2
VCR 1 VCR 2
Video 4 Video 5
Zone 2 ( ) GRN Rec ( ) RED
Pure Audio psampling U
Standby
Phones Zone 2 Level Stereo Surround THX DSP Rec Out Zone 2 Off Dimmer Memory
Clear
FM Mode Setup Tuning Enter Preset Return
S Video Audio Video L R Digital
Video 5 Input
3–5
2, 5
7
1 1, 2
3, 4
4 Use the Up/Down [ ]/[ ] but-
tons to select “3. Video Setup,”
and then press the [Enter] but-
ton.
The Video Setup menu appears.
5 Use the Up/Down [ ]/[ ] but-
tons to select “a. Video,” and
then use the Left/Right [
]/[ ]
buttons to select “VIDEO5.”
Press the [Setup] button to close the
setup menu.
6 Prepare your CD player and cam-
corder for playback, and your
VCR for recording.
7 Press the [Rec Out] button
repeatedly until “Rec Sel:
SOURCE” appears on the dis-
play.
Audio from the CD player and video
from the camcorder can now be
recorded by the VCR connected to the
VIDEO 1 OUT outputs.
8 Start recording on the VCR and
start playback on the camcorder
and CD player.
Advanced Menu
2.Input Setup
2-3.Video Setup
a.Video
:Last Valid
b.Component Video
:Last Valid
Quit:|SETUP|
Input:DVD
Input:CD
Rec Out
DTR-8.4