Integra DTR-8.4 - Manual (Page 51)

51
Basic Operation
This section explains how to select the AV component that you want to listen to or watch.
Selecting the Source AV Component
Display Audio Selector
Direct/ Pure Audio
Master Volume Standby/On
Video 1 Video 3 Tape Tuner Phono Net Audio CD DVD Video 2
VCR 1 VCR 2
Video 4 Video 5 Zone 2 ( ) GRN Rec ( ) RED Pure Audio psampling U
Standby
Push To Open
DTR-8.4
3 3
1
1
1 Use the input selector buttons to select the AV component.
On the remote controller, roll the scroll wheel to select the input
source and remote controller mode.
Note:
If neither the [Input] nor [Mode] button is illuminated, the input source and
remote controller mode are selected simultaneously. If either button is illumi-
nated, press that button first.
2 Start playback on the selected AV component.
When you select DVD or another video source component, on your TV you’ll
need to select the video input to which the DTR-8.4 is connected.
On some DVD players, you might need to turn on the digital output.
3 To adjust the volume, use the MASTER VOLUME control, or the
remote controller’s [VOL] button.
The volume can be set from 0 to 100.
The DTR-8.4 is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
Video 1
Video 3
Tape Tuner Phono
Net Audio CD
DVD Video 2
Video 4 Video 5
or
Remote
controller
DTR-8.4
Master Volume
or
Remote
controller
DTR-8.4