Integra DTR-8.4 - Manual (Page 18)

18
Remote Controller —Continued
CD mode is used to control an Integra/Onkyo CD player
connected to the DTR-8.4 via
. To select CD mode,
press the [Mode] button, and then roll the scroll
wheel until “CD” appears on the display
.
Note:
While neither the [Input] button nor [Mode] button is
illuminated, the scroll wheel changes the input source
and remote controller mode simultaneously (e.g., set the
input source and mode to “CD.”)
Boxed numbers are for MiniDisc mode (page 19).
A On button
This button is used to set the CD player to On or
Standby.
B Number/letter buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
C Mode button
This button is used with the scroll wheel to select
the remote controller modes. Press this button first,
and then roll the scroll wheel until “CD” appears on
the display.
D CH/Disc button
This button is used to select discs on a CD changer.
E Display button
This button is used to display information about the
current disc or track, including the elapsed time,
remaining time, total time, and so on.
F Previous/Next [ ]/[ ] buttons
The Previous [ ] button is used to select the pre-
vious track. During playback it selects the begin-
ning of the current track. The Next [
] button is
used to select the next track.
G FR/FF [ ]/[ ] buttons
The FR [ ] button is used to start fast reverse. The
FF [ ] button is used to start fast forward.
H Pause [ ] button
This button is used to pause CD playback.
I Repeat button
This button is used to set the repeat playback func-
tions.
J Open/Close [ ] button
This button is used to open and close the disc tray.
K Light button
This button is used to turn on or off the remote con-
troller’s illuminated buttons.
L Input button
This button is used to select the input source. Press
this button first, and then roll the scroll wheel until
“CD” appears on the display.
M VOL button
This button is used to set the volume of the
DTR-8.4.
N Muting button
This button is used to mute the DTR-8.4. This func-
tion can be set only with the remote controller.
O Play [ ] button
This button is used to start CD playback.
P Stop [ ] button
This button is used to stop CD playback.
CD Mode
A
3
4
5
6
J
K
L
M
7
8
N
Q
R 9
1
2
3
4
5
6
7
8
9
0
A
B
C
D
G
H
S I
B
P
O
F
E
Scroll wheel