Muratec MFX-1500E - Manual (Page 89)

Beyond the Basics
6 Use the numeric keypad to enter the four-digit I . D . code.
Here, we’ve entered 2345:
7 Press ENTER .
If you’ve entered an incorrect I . D . code, your fax machine rejects the attempt
and returns to standby mode.
If you’ve entered the correct
I . D . code, the display shows:
If you choose:
On: Your bulletin box erases the currently stored document when a new
document is stored in it
Off: Your bulletin box keeps both the currently stored document and the new
document, up to 30 documents in each box.
8 Press or / PROGRAM until the mode you want appears.
9 Press ENTER to save the setting. Your machine starts scanning the document
into the selected bulletin box:
Important: The file number (shown above as 1) tells you how many docu-
ments are in this bulletin box. Your machine numbers files 1-30.
You need to know the file’s number to erase or print it.
Printing a document stored in a bulletin box
You can print a document stored in your machine’s F-Code bulletin boxes without
erasing the document from memory.
To print a stored document:
1 Press / PROGRAM , P , 4, ENTER The LCD shows:
2 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
bulletin box that stores the document you want to print. We’ve entered 03:
3 Press ENTER . The LCD shows:
4 Use the numeric keypad to enter your F-Code box’s four-digit I . D . code.
Here we’ve entered 2345:
5 Press ENTER .
If you’ve entered an incorrect I . D . code, your fax machine rejects the attempt
and aborts this operation.
If you’ve entered the correct
I . D . code, the display shows:
6 Use the numeric keypad to enter the file number (1-30) of the document you
want to print. Here we’ve entered 3.
Note: If you want to print all documents stored in the bulletin box, simply
enter 0 (zero).
7 Press ENTER .
Your fax machine prints the chosen document(s), then returns to standby
mode.
Note: If the F-Code box is not storing any documents, the machine briefly
displays the following before returning to standby mode:
03:Print F-Code Doc.
No Document Stored
03:Print F-Code Doc.
File No. 3_
03:Print F-Code Doc.
File No. _
03:Print F-Code Doc.
Enter I.D. Code:2345
03:Print F-Code Doc.
Enter I.D. Code:****
Select F-Code Box
03:Muratec America
Select F-Code Box
01:Murata Machinery
F-Code Doc. File: 1
A4 Mem 100%
Overwrite Doc. :Off
Program/Enter
03:Set F-Code Doc.
Enter I.D. Code:2345
2.43