Muratec MFX-1500E - Manual (Page 73)

Beyond the Basics
Fax dialing with the Macro key
To dial a fax call using a Macro key:
1 Insert the document.
2 Press the Macro key in which you’ve stored the fax communication command.
3 Press START , if you have not registered START in the Macro key.
Your fax will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the
LCD shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD shows the number:
Erasing a Macro key
1 Press MACRO PROGRAM twice, ENTER . The LCD shows:
2 Press the Macro key ( MACRO 1 – MACRO 3) you want to erase. Here, we’ve cho-
sen MACRO 2.
3 Press ENTER . The LCD shows:
Important: If you want to quit without erasing the Macro key you’ve
selected, press / PROGRAM . The fax will return to step 2.
4 Press ENTER to erase the job.
To erase another Macro key, repeat steps 2–4. Or press STOP to return to standby
mode.
Printing a list of your Macro keys
Your fax machine can print a list of the Macro keys.
The list includes:
(1) each key’s Macro key number
(2) the name of the job stored in the Macro key
To print a list of Macro keys, press MACRO PROGRAM three times, ENTER .
Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1 Press MACRO KEY four times, ENTER . The LCD shows:
2 Press or / PROGRAM until the mode you want appears. The possible set-
tings are:
3 Press ENTER to save the setting.
Macro Speed :Fast
Program/Enter
Macro Speed :Slow
Program/Enter
Macro Speed :Norm
Program/Enter
Macro Speed :Norm
Program/Enter
Erase Macro
** Complete **
Erase Macro
Check Program/Enter
Select Macro Key
M2:Batch box list
Select Macro Key
M1:Activity journal
9-1-972-555-4335
A4 Normal
** Reserved **
Jan 29 2000 17:17
2.27