Muratec MFX-1500E - Manual (Page 43)

1.31
Getting started
Setting of enlargement or reduction for copying
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the FBS ; it is not
available for copying using the ADF .
To change the reduction or enlargement rate for copying, either select a preset rate
or directly enter a rate.
Selecting a preset rate
Either . . .
• Press
ENLARGE to select one of the following fixed enlargement rates.
200%
129% : Half-letter (5.5
″ × 8.5 ″ ) → Letter (8.5 ″ × 11 ″ )
100%
. . . or . . .
• Press
REDUCE to select one of the following fixed reduction rates.
78%: Legal
→
Letter
64%: Ledger (11 ″ × 17 ″ ) → Letter (8.5 ″ × 11 ″ )
Directly entering a rate
Using the numeric keypad, directly enter the reduction or enlargement rate by
doing one of the following.
Either . . .
1 Press #.
2 Enter your desired rate using the numeric keypad. You can set any rate from
50% reduction through 200% enlargement.
3 Press # again.
. . . or . . .
Press
or to adjust the rate, at 1% intervals, from/including 50% reduction
through 200% enlargement.
Copy protection
With such a versatile copier built right into your fax machine, you might want to
make sure it doesn’t become too tempting to some people whose unauthorized copy-
ing could deplete your machine’s supplies more rapidly. So, to limit the use of your
fax machine to only sending and receiving faxes — in other words, to activate copy
protection:
1 If the machine is in Fax mode, skip to step 2.
Otherwise, press
COPY / FAX to change to Fax mode.
2 Press PROGRAM , J , 0, 3, ENTER .
3 Press PROGRAM to turn on copy protection.
4 Press ENTER
While this setting is active, whenever someone tries to change the machine to Copy
mode, the machine will sound a brief alarm tone and display:
Important: To turn off copy protection off so that you can again use the machine’s
copying function, repeat steps 2-4, above (step 1 is unnecessary since
the machine will be in Fax mode) except that, in step 3, you press
PROGRAM so that the display shows:
Copy Protect :Off
Program/Enter
Fax Ready
Copy Off
Copy Protect
** Complete **
Copy Protect :On
Program/Enter
Copy Protect :Off
Program/Enter