Muratec MFX-1500E - Manual (Page 51)

Beyond the Basics
5 Press ENTER to save the setting. The LCD now asks if you want the alarm turned
on or off:
6 Press or / PROGRAM until the mode you want appears.
If you want to turn off the alarm, select “On” and the machine will be quiet.
Otherwise, the machine will beep.
7 Press ENTER to save the setting. The LCD now asks if you want the key tones on
or off:
8 Press or / PROGRAM until the mode you want appears.
If you want to turn off the tones, select “On” and the machine will be quiet.
Otherwise, the machine will beep when the keys are pressed.
9 Press ENTER to save the setting.
If you turned off the alarm or the key tones in the steps above, your machine
gives you the option of setting the volume for the alarm and key tones. If this
option appears, skip to step 10.
If you didn’t turn any of these off, your fax machine returns to standby mode.
10 The LCD shows your fax’s current setting:
11 Press or / PROGRAM until the mode you want appears.
Below are the possible settings:
= Loudest setting.
= Medium setting.
= Low setting.
12 Press ENTER to save the setting.
Setting the confirmation stamp
You can set your fax machine so that it will automatically place a smallblue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you’re sending documents you don’t want the
fax to stamp.
1 Press / PROGRAM , J , 1, 4, ENTER . The LCD shows your fax’s current setting:
2 Press or / PROGRAM until the mode you want appears.
In this example, we’ve chosen On.
3 Press ENTER to save the setting.
Stamp :On
Program/Enter
Stamp :Off
Program/Enter
Alarm&Key Vol. :Min
Program/Enter
Alarm&Key Vol. :Mid
Program/Enter
Alarm&Key Vol. :Max
Program/Enter
Alarm&Key Vol. :Mid
Program/Enter
Key Buz.Silent :Off
Program/Enter
Alarm Silent :Off
Program/Enter
2.5