Muratec MFX-1500E - Manual (Page 17)

1.5
Getting started
11 START — Press to begin a fax transmission or reception.
12
CLEAR ALL — Resets copying settings to their defaults.
13 STOP — An all-purpose “Whoa!” key. Stops the current operation and ejects a
document from the document feeder.
14
BROADCAST — Press to send a broadcast fax (sending the same document to
more than one location).
15 BOOK DOC SIZE — Instructs the fax to scan either letter- or legal-sized docu-
ments when you use the flatbed scanner.
16
SPEED DIAL / TEL INDEX — Starts a speed-dialing operation, which you finish by
pushing three of the keys on the numeric keypad. Also displays one-touch and
speed-dial entries sorted alphanumerically, as in a telephone directory.
17
CANCEL — Press to delete characters on the LCD and cancel commands you
have entered into the machine.
18 In Fax mode:
REDIAL / PAUSE — Redials the last number you dialed. In certain operations, it
also produces a special pause character which can be useful when dialing
long-distance numbers.
Or, in Copy mode:
PAPER SIZE ? — Selects the printout paper you want to use.
19
ENTER — Much as STOP is a “Whoa!” key, ENTER is a “Go!” key. It confirms user
settings, begins operations and moves through command levels.
20 In Fax mode:
DIALING OPTIONS — Press this to insert special symbols into telephone num-
bers (see page 2.7).
Or, in Copy mode:
SORT COPY — Press this key to toggle the sorting of printed copies.
21 In Fax mode:
/ PROGRAM — Scrolls (moves) through features and command options as dis-
played on the LCD .
Or, in Copy mode:
Press
to increase the reduction or enlargement rate at 1% intervals.
22 In Fax mode:
GROUP DIAL — Press this to set up a fax transmission to a call group, a set of
fax numbers which will receive the same document in one fax operation.
Or, in Copy mode:
ENLARGE % — Press this key to choose one of several fixed copy enlargement
rates. (See page 1.31 for more information.)
23 In Fax mode:
— Scrolls (moves) through features and command options as displayed on
the LCD .
Or, in Copy mode:
Press
to decrease the reduction or enlargement rate at 1% interval.
While scanning a document:
NEXT — Press to tell your machine to scan one or more additional documents
after the current scanning ends.
24 In Fax mode:
COMMUNICATION OPTIONS — Chooses from among several fax options: delayed
transmission, SecureMail transmission, relay broadcast, polling, batch trans-
mission or F-Code communication.
Or, in Copy mode:
REDUCE % — Press this key to choose one of several preset copy reduction
rates. (See page 1.31 for more information.)
25 RESOLUTION — Press to toggle among the three resolution modes and
grayscale.
26
CONTRAST — Press to enter the contrast setting mode. To change the contrast
level, press or keys.
27 COPY / FAX — Press this key to toggle between Fax mode or Copy mode.