Muratec MFX-1500E User Manual
Page 28
1.16
Getting started
5
Press or /
PROGRAM
until the mode you want appears.
Here, we’ve changed the setting to On:
6
Press
ENTER
to save the setting and continue.
7
The
LCD
now asks you to enter your fax number as you want it to appear on
other fax machines’ displays or printouts. The fax industry term for this
number is Subscriber
ID
.
8
Use the numeric keypad to enter the fax number. To insert a dash, as shown
here, press
DIALING OPTIONS
once. The number may contain up to 20
characters (numbers and dashes).
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one number, press
to move left, or /
PROGRAM
to
move right. Press
CANCEL
to erase the number. Then re-enter the fax
number correctly.
9
Press
ENTER
to save the number.
10
The
LCD
now asks you to enter the name you want to appear at the top of
faxes you send. The name may be up to 22 characters in length.
Use the one-touch keys to enter letters and other non-numeric characters.
The word “Upper” means the machine will enter only upper-case letters. If
you press
R
, the machine will see it as an
R
(not an r).
To type a lower-case letter, press
ALPHABET
. The display changes to:
This means pressing one-touch keys will enter lower-case letters: pressing
R
will produce an r (not an
R
) on the display.
To switch back for upper-case entries, press
ALPHABET
.
To enter spaces, punctuation and symbols, use the one-touch keys.
In “Beyond the Basics,” we’ll show you how to use the
CODE
function to enter
even more characters (see page 2.2).
Note: If you make a mistake, press
CANCEL
to erase to the left.
To change just one character in the name, press
to move left, or
/
PROGRAM
, to move right. Press
CANCEL
to erase the character. Then
re-enter the character correctly.
11
Press
ENTER
to save the setting and continue.
12
The
LCD
now asks you to enter the type of dialing needed for the fax machine,
either tone or pulse:
13
Press or /
PROGRAM
until the mode you want appears.
Here, we’ve changed the setting to Pulse mode:
14
Press
ENTER
to save the setting and continue.
15
The
LCD
now shows the machine’s current reception mode.
16
For now, press
or /
PROGRAM
until the setting Fax Ready appears. (This
setting can always be changed. We’ll discuss reception modes further on pages
1.24–1.27.)
17
Press
ENTER
to save the setting. Your machine will return to standby mode.
EasyStart is complete
!
Fax Ready
Program/Enter
Phone Type :Pulse
Program/Enter
Phone Type :Tone
Program/Enter
Your Name ;Lower
_
Your Name ;Upper
_
Your Fax Number
972-555-5525
Your Fax Number
Daylight Saving:On
Program/Enter