Muratec MFX-1500E - Manual (Page 68)

Beyond the Basics
Printing a document stored in a batch box
To print a document stored in a batch box:
1 Press / PROGRAM , N , 4, ENTER . The LCD shows:
2 Use the numeric keypad to enter the number (1–5) of the batch box storing the
document you want to print.
3 Press ENTER . The LCD shows:
4 Use the numeric keypad to enter the document’s two-digit file number (01–40).
If the file number is 01–09, be sure to enter the leading zero.
5 Press ENTER .
Your fax machine prints the document, then returns to standby mode.
Erasing a document stored in a batch box
To erase a document stored in a batch box on your fax machine:
1 Press / PROGRAM , N , 6, ENTER . The LCD shows:
2 Use the numeric keypad to enter the number (1–5) of the batch box storing the
document you want to erase.
3 Press ENTER . The LCD shows:
4 Use the numeric keypad to enter the document’s two-digit file number (01–40).
If the file number is 01–09, be sure to enter the leading zero.
5 Press ENTER . The fax machine now gives you one last chance to change your
mind before erasing the document.
Important: To quit the operation without erasing this or any document,
press STOP . The machine returns to standby mode.
6 Press ENTER . The fax machine erases the document you’ve chosen, then
returns to standby mode.
Erase Batch Doc.
Check Enter/Stop
Erase Batch Doc.
Enter File No. _
Erase Batch Doc.
Enter Box No. _
Print Batch Doc.
Enter File No. _
Print Batch Doc.
Enter Box No. _
2.22