Muratec MFX-1500E - Manual (Page 118)

Just in case …
What you see on the LCD What it means/What to do
Memory Overflow During transmission (or copying), you tried to
Enter Or Cancel enter more pages into memory than your fax
could store. Press
ENTER to tell your fax to keep
as many pages in memory as possible, or press
CANCEL to delete from memory all pages stored
during this operation (but not previous opera-
tions).
Mirror Carriage Error The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Mirror Locked The transport mode is not turned off.
Turn off the transport mode (see page 1.7, 1.12).
No Command You pressed REVIEW COMMANDS to review
upcoming commands, but your fax machine had
none stored.
No Dept. Code You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
. . . or . . .
You entered incorrect department code at fax
sending while the department feature is on.
Enter correct department code.
No Document Stored You tried to print a document from memory, but
your fax machine had none stored.
No Drum The drum cartridge is missing or has not been
properly installed in your fax machine.
Please properly install the drum cartridge.
No Number Stored You selected an autodialer, batch box or F-Code
box number for which there is no phone number
programmed. Either choose another number or
dial a phone number directly from the numeric
keypad.
No Passcode You tried to protect an operation or department
code but there’s no protection passcode stored in
your fax machine. Store a protection passcode in
your machine, then retry protecting the operation
or department code.
What you see on the LCD What it means/What to do
No PIN Number You selected “Mode1” in the PIN mask feature
and tried to call an autodialer number in which
no PIN has been entered, or to call using
numeric keypad without
PIN . Enter a PIN , then
try again.
No Report You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
No Toner Cartridge The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
Open Top Cover Your fax machine has detected a paper jam in
Please Remove Paper its interior. See page 3.2 for instructions on
clearing the jam.
Open 1st Side Cover Your fax machine has detected a paper jam
Please Remove Paper inside the first cassette’s side cover.
Open the cassette’s side cover and remove the
jammed paper carefully.
Open 2nd Side Cover Your fax machine has detected a paper jam
Please Remove Paper inside the second cassette’s side cover.
Open the cassette’s side cover and remove the
jammed paper carefully.
Open 3rd Side Cover Your fax machine has detects paper jam inside
Please Remove Paper the third cassette’s side cover. Open the cassette’s
side-cover and remove the jammed paper care-
fully.
Open & Close ScanCover Either your document wasn’t inserted correctly,
Reset Document or the fax to which you’re sending can’t handle
the document’s page length. Reset the page and
try again.
Please Call Service The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer
or Muratec Customer Support.
Please Replace Drum Your drum cartridge has reached the limit of its
design life. Please replace the drum cartridge.
Please Replace Toner Your toner cartridge is empty. Replace the toner
cartridge.
3.8