Muratec MFX-1500E - Manual (Page 41)

1.29
Getting started
Sort copy
Press SORT COPY to toggle (switch on or off) sorting copy if necessary. The initial set-
ting is Off.
How to copy
Copying using the ADF
1 If necessary, press COPY / FAX to change to Copy mode.
Otherwise, proceed to step 2.
2 Prepare the document just as you would to send a fax.
Note: There are certain types of documents you never should insert into
your fax machine. (You might wish to review “Things NOT to put in
your fax,” page 1.17.)
3 Insert your document face up. Adjust the document guides for a correct fit.
When the document is correctly inserted, you’ll hear a short beep.
Note: Make sure that all the pages are the same size and thickness.
Do not attempt to feed documents of different size and thickness in
the same stack.
4 Adjust resolution and contrast if necessary.
Press
RESOLUTION to change the resolution.
Press CONTRAST , then press or to change the contrast.
5 Set the reduction rate, if you want. (See “Setting of enlargement or reduction
for copying,” page 1.31.)
6 If you want to make only one copy of each page of the document, skip to step
9. Otherwise, proceed to step 7.
7 Use the numeric keypad to enter the desired number of copies for each page
in the document. You may choose one to 99 copies. Here, we’ve entered “3” to
choose a setting of three copies.
8 Press SORT COPY once or twice to “toggle” (switch on or off) the sorting of
copies, as desired.
9 Press START to begin the copying process.
Note: To stop the copying before it is through, press STOP .
Note: Thanks to your machine’s QuardAccess ® feature (see page 2.37 for more),
copying doesn’t keep you incommunicado while in progress: you can start a
fax or voice call and even receive a voice call during copying.
When using the FBS
1 If necessary, press COPY / FAX to change to Copy mode.
Otherwise, proceed to step 2.
2 Open the book-cover, place your document face down on the FBS and align it
with the scale on the right.
Note: Be sure that you place the original document on the FBS in the same
orientation as the paper in the paper source (which you’ll select in
step 4).
3 Gently close the book-cover.
4 Press PAPER SIZE ? to select recording paper (see page 1.28).