Muratec MFX-1500E - Manual (Page 100)

Beyond the Basics
8 Press ENTER . The LCD shows:
Note: If this box doesn’t have a password, press ENTER . Then skip to step 12.
9 Use the numeric keypad to enter the ITU - T password for the box. Here, we’ve
entered 654321:
When finished, press ENTER .
10 If you want the transmission to begin immediately every time you press the
key, press
ENTER and skip to step 13.
If you want to delay the transmission (perhaps to take advantage of lower
phone rates), press
COM - OPTIONS , ENTER .
11 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax could perform the command:
12 Press ENTER , ENTER .
13 The LCD now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press STOP
to return your machine to its usual standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1 Insert the document.
2 Make any necessary adjustments as usual.
3 Press the programmable one-touch key in which you’ve stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 2.48 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the LCD shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD shows the number:
Erasing a programmable one-touch key
1 Press / PROGRAM , C , 2, ENTER . The LCD shows the first programmable one-
touch number that has been programmed:
Note: If a one-touch number other than 73 appears, it means 73 is empty.
2 Press the programmable one-touch key you want to erase. Here, we’ve
selected 75:
3 To erase a different programmable one-touch key than the one that appears
on the
LCD , press that key now.
Select Program No.
75:Polling
Select Program No.
73:Delayed
9-1-972-555-4335
A4 Normal
** Reserved **
Jan 29 2000 17:17
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
Enter Password
654321_
Enter Password
_
2.54