Muratec MFX-1500E User Manual
Page 56
Beyond the Basics
One-touch fax dialing
To dial a fax call using a one-touch number:
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT
.
4
Press the one-touch key in which you’ve stored the number.
What happens next depends on whether you specified transmission from memory or
transmission from the feeder:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The
LCD
shows the Location
ID
and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location
ID
, the number appears.
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick Memory transmission, see page 2.31.)
If you specified normal transmission from memory:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The
LCD
shows the Location
ID
and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location
ID
, the number appears.
• When the other machine answers, your fax transmits the document directly from
memory. (To review memory transmission, see page 1.18.)
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes.
• The
LCD
shows the Location
ID
and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location
ID
, the number appears.
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer to order an
optional handset.)
To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press
MONITOR
/
CALL
to use the monitor speaker
2
Press the one-touch key in which you’ve stored the number. As the machine
dials, it shows the number on the
LCD
:
Note: Remember that your fax machine’s monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
MONITOR
/
CALL
to dial, press
MONITOR
/
CALL
to
hang up.
Erasing a one-touch number
1
Press /
PROGRAM
,
A
, 2,
ENTER
. The
LCD
shows the one-touch number you
have already entered:
Note: If the one-touch number that appears is other than 01, it means that
01 is empty.
Select One-Touch
01:9-1-555-345-6789
**
Tel Mode **
9-555-2842_
Katz’s Cat Care
A4 Normal
Katz’s Cat Care
A4 Normal
Katz’s Cat Care
A4 Normal
2.10