FUJITSU DL6400 - Manual (Page 80)

Precautions
User’s Manual 7-17
PAPER
SPECIFICATIONS
2. Binding hole
The shaded area on page 7-15 also places restrictions on binding
holes punched in that area. If punching is necessary, make the holes
7 mm (0.28 in) or less in diameter.
3. Smearing caused by paper feed roller
If the percentage of printing in the shaded areas in the figure below
is high, the paper feed roller may smear paper at loading or ejection.
Design the format to make areas as far away from the printed area
as possible or print a color or pattern on the paper to make smearing
unnoticeable.
Smeared areas in the figure below assume that the left margin is
25.4 mm (1 in). If the left margin is changed, smear areas move
proportionally.
Unit: mm (in)
H
First column
24.5
(0.96)
24.5
(0.96)
22 (0.87)
89.5
(3.52)
22 (0.87)
22 (0.87)
22 (0.87)
22 (0.87)
22 (0.87)
345.5
(13.6)
284.5
(11.2)
199.5
(7.85)
144.5
(5.69)
DL6400/6600 Book Page 17 Friday, July 31, 1998 11:42 AM