FUJITSU DL6400 - Manual (Page 117)

Changing Head Gap Adjustment Options
8-36 User’s Manual
The GAP-ADJ function adjusts the gap between the print head and the
paper. This function is displayed only when the automatic paper
thickness control (APTC) feature is built in.
Exit setup mode and save any changes either by exiting setup mode
immediately and selecting SAVE&END or by printing before exiting
setup mode, selecting SELF-TST, and pressing ONLINE.
Either way, changed settings are saved as the printer's new default
settings. These new default settings remain active until they are
changed.
Table 8–7 GAP-ADJ option
GAP-ADJ item Options Description
AUTO
1-PLY
2-PLY
3-PLY
4-PLY
5-PLY
6-PLY
7-PLY
8-PLY
POS.A
POS.B
POS.C
POS.D
MANUAL
Specifies the print head gap.
The print head gap is set automatically.
Select one to eight-ply paper and auxiliary positions
A, B, C, or D.
Adjust the head gap using the paper thickness lever.
<==END==> Indicates item termination.
Changing Head
Gap Adjustment
Options
Exiting and
Saving
DL6400/6600 Book Page 36 Friday, July 31, 1998 11:42 AM