FUJITSU DL6400 - Manual (Page 72)

Cut Sheets
User’s Manual 7-9
PAPER
SPECIFICATIONS
Important:
1. Paper with its weight in angle brackets < > must be at least 254
mm (10 in) wide.
2. For multipart forms the ream weight of the bottom sheet being
used must be one of the values in parentheses ( ).
3. Characteristics of paper with the number of parts in brackets [ ]
may differ slightly according to the manufacturer and should be
tested carefully before use.
4. The total thickness of multipart paper must not exceed 0.65 mm
(0.025 in).
3. Binding
Paste sheets at the top.
Important:
Pasted portions must be flexible and free of curl.
Front
Paste here.
Side
DL6400/6600 Book Page 9 Friday, July 31, 1998 11:42 AM