FUJITSU DL6400 User Manual
Page 227
Power-on Special Functions
E-22
User’s Manual
8. Press ONLINE to save the settings. The prompt
message shown at the left appears.
9. To save the settings temporarily, press F1. To save
the settings permanently, press F2.
A save execution message appears and then the
original basic menu is redisplayed.
Table E-1 lists functions you can execute by pressing the ONLINE or
F1 to F3 control panel buttons while turning on the power. Keep the
buttons pressed until the buzzer sounds. Use only the combinations of
buttons listed here. If you make a mistake (the printer displays a
message not listed in the table), turn the power off without responding
affirmatively to the message.
Table E–1
Power-on special functions
Buttons pressed during power on
Function
Initial message
ONLINE
Vertical alignment
Vertical alignment print
F1
Printing self-test
Self-test print
F2
Printing demonstration
DEMO pattern printing
F1
F2
Printing hexadecimal dump
Hex dump mode
F1
F2
F3
Option listing
Setup values listing
USE
SAVE
Not-exit
EXIT: Use temporarily?
Form
↑
feed
Tear off
paper
Line
↑
feed
Power-on
Special
Functions
#E_AppendixE Page 22 Wednesday, September 2, 1998 10:05 AM