FUJITSU DL6400 - Manual (Page 107)

Changing Hardware Options
8-26 User’s Manual
8 NONE 1
8 NONE 2
8 EVEN 1
8 ODD 1
7 EVEN 1
7 ODD 1
7 MARK 1
7 SPACE1
7 EVEN 2
7 ODD 2
Data bits Parity bit Stop bits
8 None 1
8 None 2
8 Even 1
8 Odd 1
7 Even 1
7 Odd 1
7 Mark 1
7 Space 1
7 Even 2
7 Odd 2
The data format also includes a start bit. The mark is
logical 1. The space is logical 0.
150
300
600
1200
2400
4800
9600
19200 The baud rate is given in bits per second (bps). Select the
same baud rate as for the processor or modem.
XON/XOF
DTR
REV-CHL
Indicates the data transmission protocol.
DC1 and DC3 codes are used.
The Data Terminal Ready signal is used.
The Reverse Channel signal is used.
IGNORE
DETECT The printer ignores DSR.
The printer detects DSR.
FULL
HALF
Simultaneous data transmission occurs in opposite
directions.
Data transmission occurs in either direction, but not
simultaneously.
IGNORE
DETECT The printer ignores CTS.
The printer detects CTS.
Table 8–4 HARDWRE options (Continued)
HARDWRE item Options Description
DL6400/6600 Book Page 26 Friday, July 31, 1998 11:42 AM