FUJITSU DL6400 - Manual (Page 43)

Returning to Continuous Forms
4-12 User’s Manual
After printing on cut sheets with continuous forms loaded, you can
easily return to printing continuous forms.
1. Remove cut sheets, if any.
2. Tip back the paper guide.
3. Close the front tray.
4. Press the PAPER PATH button on the control panel to select
FRONT TRACTOR or REAR TRACTOR, whichever you want
to use. The FRONT TRACTOR or REAR TRACTOR lamp
lights. Continuous forms are then loaded automatically.
The REAR TRACTOR lamp is for the optional rear-feed tractor.
5. Check the vertical printing position. See “Loading Continuous
Forms (Front)” on page 4-1.
Returning to
Continuous
Forms
Front tray
Paper guide
DL6400/6600 Book Page 12 Friday, July 31, 1998 11:42 AM