FUJITSU DL6400 - Manual (Page 70)

Continuous Forms
User’s Manual 7-7
PAPER
SPECIFICATIONS
6. Print area
The figure below shows the print area on continuous forms.
Print area
Print area
A
A
D
B C
E
F
F
F
A
Perforations
(fold)
101.6 to 419 mm
(4 to 16.5 in)
G
Area Size in mm
(in) Remarks
A 4.2 (0.17) Characters printed in this
area may not be neat. A line
spacing of 4.2 mm (1/6 in) or
more prevents characters on
adjacent lines from
overlapping.
B 5.08 to 30
(0.2 to 1.18) Depending on the paper
width, this size varies as
follows:
101.6 to 119.4 mm (4 to 4.7
in) wide: 5.08 to 9 mm (0.2
to 0.35 in)
388.6 to 419 mm (15.3 to
16.5 in) wide: 15 to 30 mm
(0.6 to 1.18 in)
C 5.08 (0.2)
or more This size varies with the
paper width and number of
print columns, but must be at
least 5.08 mm (1/5 inch).
D 152 (6.0) This area feeds off the
tractors and prevents reverse
line feed.
E Appropriately
29 (1.1) This value indicates the
paper-end detection point.
F 3.5 (0.14) Do not move the printing
unit horizontally in this area
as paper may be smeared by
the ink ribbon or the printing
unit may be caught at bulges.
G 4.2 (0.17)
DL6400/6600 Book Page 7 Friday, July 31, 1998 11:42 AM