FUJITSU DL6400 - Manual (Page 54)

Demonstration Pattern Printing
User’s Manual 5-11
OPERATING
THE PRINTER
The printer prints a demonstration pattern showing some printing
features, as shown in Figure 5-4. To print a demonstration pattern,
follow the steps below.
For the operation of the printer with the LCD control panel, see
Appendix E.
1. Load a sheet of letter- or A4-size paper.
2. Turn off the printer.
3. Holding down the FONT button, turn the printer back on.
The printer will start printing the demonstration pattern.
4. For cut sheets, the demonstration stops after printing a page. If a
cut-sheet feeder or continuous forms are used, the demonstration
pattern is repeated. To stop or restart the demonstration during
printing, press ONLINE.
5. To exit demonstration mode, turn off the printer.
Demonstration
Pattern Printing
DL6400/6600 Book Page 11 Friday, July 31, 1998 11:42 AM