Furuno FS-1570 - Manual (Page 80)

5 CALLING, RECEIVING
5-18
5.3.2 Receiving a group call
Group ID must be registered in order to receive a group call. See paragraph 6.2.
1. The audio alarm sounds and the display shows "Group call received" when a group call
is received.
FROM SHIP: 123456789
ROUTINE
TELEPHONE
TX: 2164.0 KHZ
RX: 2164.0 KHZ
Group
call received.
STOP ALARM
2. Press the [CANCEL] key to silence the alarm, and the display changes as below.
* Received message *
MAR-23-2002-23:59 ECC: OK
GROUP CALL
FROM SHIP : 123456789
ROUTINE
TELEPHONE
RX: 2164.0 KHZ
TX: 2164.0 KZH
GO TO ALL VIEW
3. Press the [CANCEL] key to go to the radiotelephone screen. Watch on the working
frequency.
Watching NBDP Terminal Unit
After receiving a group call, do the following to send a message by NBDP Terminal Unit.
1. After the able acknowledge call is transmitted, the display shows “OCCUPIED” and the
TX and RX frequencies.
2. The message from the sending station appears on your NBDP Terminal Unit.