Furuno FS-1570 User Manual

Page 75

Text mode
Original mode

5. CALLING, RECEIVING

5-13

DSC FREQ:

12577.5 KHZ

TO COAST:

121234567

COM. TYPE:

TELEPHONE

COM. FREQ: CH12034

CALL TYPE:

ABLE

ACKNOWLEDGEMENT

Compose message

GO TO ALL VIEW

Press the [CALL] key to send the call. The display changes as below.

Able acknowledge
call in progress!

TIME TO GO:

DSC FREQ :

12577.5

KHZ

TO COAST

121234567

ROUTINE
TELEPHONE

CH 12034

After the call is completely sent (transmission time: 7 sec.), you can begin voice
communications by radiotelephone.

Communicating by NBDP Terminal Unit

After acknowledging an individual call, do the following to communicate by NBDP Terminal
Unit.

1. After the able acknowledge call is transmitted, the display shows “OCCUPIED” and the

TX and RX frequencies.

2. The message from the other party appears on your NBDP Terminal Unit.
3. After receiving the message from the other party, type your message and transmit it.
4. Press the function key [F10] (BREAK) to disconnect the line.