Furuno FS-1570 - Manual (Page 112)

6 PREPARING TX CALLS
6-4
6.2 Preparing Group Calls
1. At the DSC standby screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose MESSAGE and then push the [ENTER] knob.
3. Push the [ENTER] knob to open the CALL TYPE menu.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Rotate the [ENTER] knob choose GROUP CALL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the GROUP ID entry window.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 0 --------
: TELEPHONE
: NO INFO
: 2M-INTL
000000000
6. Key in ID of group with the numeric keys and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 012345678
: TELEPHONE
: NO INFO
: 2M-INTL
NBDP-FEC
TELEPHONE
8. Rotate the [ENTER] knob to choose appropriate communications type and then push
the [ENTER] knob.
9. Push the [ENTER] knob to open the COM. FREQ menu.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 012345678
: TELEPHONE
: NO INFO
: 2M-INTL
FREQUENCY
CHANNEL
10.Rotate the [ENTER] knob to choose appropriate item and then push the [ENTER] knob.
(See page 5-6 for details for how to enter frequency and channel.)
11. Push the [ENTER] knob to open the DSC FREQ menu.